Shanghai Shenglin M&E Technology Co., Ltd.
Shanghai Shenglin M&E Technology Co., Ltd.
Add to Cart
Technical Specification:
| Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance toatmospheric agents. |
| Direct expansion coils with condensate drain tray. |
| Hermetic compressor High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,mounted on rubber vibration dampers. |
| Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise |
| Centrifugal fan Forward curve centrifugal fans for air treatment section and axial fans for condensation section. Front, side and underside air discharge of the treatment unit. High external pressure, long air supply distance |
| Electric panel Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components. |
| Easy operation line controller Cooling/Heating/Auto. Error indication. Timing on/off. |
Preferred Usage Areas
Commercial Air Conditioning
Hotel Air Conditioning
Airport Air Conditioning
:
Technical parameter:
| Model | SRF45ZA | SRF50ZA | SRF60ZA | SRF72ZA | SRF90ZA | SRF105ZA | |||||
| SF45ZA | SF50ZA | SF60ZA | SF72ZA | SF90ZA | SF105ZA | ||||||
| Nominal cooling capacity | kW | 44.5 | 50 | 60 | 70 | 90 | 105 | ||||
| Nominal heating capacity | kW | 48.7 | 54.3 | 64 | 75.4 | 96.2 | 113.2 | ||||
| Energy regulation | % | 0,33,66,100 | 0,30,70,100 | 0,50,100 | 0,50,100 | 0,33,66,100 | 0,33,66,100 | ||||
| Power supply | 380V / 3Ph / 50HZA | ||||||||||
| Cooling input capacity | kW | 17 | 19.5 | 22.8 | 26.7 | 32.9 | 39.7 | ||||
| Heating input capacity | kW | 15.6 | 18 | 21 | 24.8 | 30.4 | 36.7 | ||||
| Start current | A | 168 | 186 | 175 | 199 | 197 | 266 | ||||
| Cooling running current | A | 31.7 | 35.6 | 39.9 | 48.3 | 61 | 70.6 | ||||
| Heating running current | A | 29.9 | 33.5 | 37.5 | 45.4 | 57.3 | 66.3 | ||||
| Throttling method | Thermal expansion valve | ||||||||||
| Cooling system | 1 | ||||||||||
| Refrigerant | R410A | ||||||||||
| Compressor | Type | Hermetic scroll compressor | |||||||||
| Qty | 2 | 2 | 2 | 2 | 3 | 3 | |||||
| Condensation side | |||||||||||
| Condenser | Type | Copper pipe copper fin | |||||||||
| Fan | Qty | 1 | 1 | 1 | 1 | 2 | 2 | ||||
| Drive type | Direct drive | ||||||||||
| Motor power | kW | 1.1 | 1.5 | 1.5 | 2.2 | 2X1.1 | 2X1.5 | ||||
| Air volume | m3 /h | 16500 | 21000 | 21000 | 27000 | 33000 | 42000 | ||||
| a | 2.65 | 3.82 | 3.82 | 5.49 | 2.65 | 3.82 | |||||
| kw | 1.14 | 2.02 | 2.02 | 2.875 | 1.14 | 2.02 | |||||
| Evaporation side | |||||||||||
| Evaporator | Type | Evaporator | |||||||||
| Qty | 1 | 1 | 1 | 1 | 1 | ||||||
| Motor power | 3 | 3 | 4 | 4 | 5.5 | 5.5 | |||||
| Air volume | 7600 | 8500 | 10900 | 12500 | 16000 | 19500 | |||||
| Drive type | |||||||||||
| Static pressure(Pa) | 250 | 250 | 300 | 300 | 300 | 300 | |||||
| Filter | Aluminum filter G3 | ||||||||||
| Noise dB(A) | 73 | 73 | 73 | 75 | 74 | 75 | |||||
| Refrigerant filling volume(kg) | 4.3+ | 4.3+8.5 | 2x7.5 | 2x8.5 | 3x7.5 | 3x8.5 | |||||
| Overall dimensions | Length(mm) | mm | 2268 | 2268 | 2298 | 2298 | 2878 | 2878 | |||
| Width(mm) | mm | 1440 | 1440 | 1650 | 1650 | 2140 | 2140 | ||||
| Height(mm) | mm | 1167 | 1167 | 1400 | 1400 | 1964 | 1964 | ||||
| Weight | 750 | 770 | 880 | 960 | 1160 | 1350 | |||||
1. Nominal cooling capacity is under nominal air volume, indoor DB/WB temperature is 27℃/19℃ and outdoor DB/WB temperature is 35℃/24℃ condition;
2. Nominal heating capacity is under nominal air volume, indoor DB/WB temperature is 20℃/15℃ and outdoor DB/WB temperature is 7℃/6℃ condition;
| Model | SRF120ZA | SRF140ZA | SRF150ZA | SRF180ZA | SRF210ZA | SRF300ZA | |||
| SF120ZA | SF140ZA | SF150ZA | SF180ZA | SF210ZA | SF300ZA | ||||
| Nominal cooling capacity | kW | 120 | 140 | 149 | 180 | 210 | 298 | ||
| Nominal heating capacity | kW | 128.3 | 150 | 159.2 | 192.5 | 226 | 318 | ||
| Energy regulation
| % | 0,25,50,75,100 | 0,50,100 | 0,16.6,33.3,50,66.4,83,100 | 0,25,50,75,100 | ||||
| Power supply | 380V / 3Ph / 50HZA | ||||||||
| Cooling input capacity | kW | 45.1 | 55.7 | 55.1 | 69.9 | 83 | 106.7 | ||
| Heating input capacity | kW | 41.7 | 51.8 | 51.5 | 64.8 | 77 | 100 | ||
| Start current | A | 218 | 252 | 323 | 232 | 301 | 415 | ||
| Cooling running current | A | 82.4 | 101.4 | 100.2 | 130.9 | 151 | 192.3 | ||
| Heating running current | A | 77.4 | 95.7 | 95.1 | 123.5 | 142.3 | 184.3 | ||
| Throttling method | Thermal expansion valve | ||||||||
| Cooling system | 4 | 4 | 2 | 6 | 6 | 4 | |||
| Refrigerant | R410A | ||||||||
| Compressor | Type | Hermetic scroll compressor 380V / 3Ph / 50HZA | |||||||
| Qty | 4 | 4 | 2 | 6 | 6 | 4 | |||
| Condensation side | |||||||||
| Condenser | Type | Copper pipe copper fin | |||||||
| Fan | Qty | 2 | 2 | 2 | 4 | 4 | 4 | ||
| Drive type | Direct drive | ||||||||
| Motor power | kW | 2X1.5 | 2x2.2 | 2x2.2 | 4X1.1 | 4X1.5 | 4x2.2 | ||
| Air volume | m3 /h | 42000 | 54000 | 54000 | 66000 | 84000 | 108000 | ||
| Evaporation side | |||||||||
| Evaporator | Type | Copper pipe copper fin | |||||||
| Qty | 1 | 1 | 1 | 1 | 1 | 1 | |||
| Motor power | kW | 7.5 | 11 | 11 | 15 | 15 | 18.5 | ||
| Air volume | m3 /h | 21000 | 25000 | 26000 | 32000 | 38000 | 54000 | ||
| Drive type | Pulley | ||||||||
| Static pressure(Pa) | 400 | 400 | 500 | 500 | 500 | ||||
| Filter | Aluminum filter G3 | ||||||||
| Noise dB(A) | 75 | 79 | 79 | 80 | 80 | 82 | |||
| Refrigerant filling volume(kg) | 4x7.5 | 4x8.5 | 2x17 | 6x7.5 | 6x8.5 | 4x14 | |||
| Overall dimensions | Length(mm) | mm | 3626 | 3626 | 3626 | 4690 | 4690 | 5660 | |
| Width(mm) | mm | 2200 | 2200 | 2200 | 2330 | 2330 | 2330 | ||
| Height(mm) | mm | 2047 | 2047 | 2047 | 2055 | 2427 | 2055 | ||
| Weight | kg | 1710 | 1820 | 1850 | 2180 | 2430 | 2860 | ||
1. Nominal cooling capacity is under nominal air volume, indoor DB/WB temperature is 27℃/19℃ and outdoor DB/WB temperature is 35℃/24℃ condition;
2. Nominal heating capacity is under nominal air volume, indoor DB/WB temperature is 20℃/15℃ and outdoor DB/WB temperature is 7℃/6℃ condition;
Workshop showing:
 | | |
| | |
Reference:
| Country: Turkey Application:distributor Type: heat pump type Cooling capacity: 108.9KW; Heating capacity: 113KW; 380V-3Ph-50hz R410a ESP: 350 Pa; 19940 m3/h 25% fresh air; | Country: Nigeria Application: Pharmaceutical Factory Type: heat pump type Cooling capacity: 36.2kW Heating capacity: 82kW Refrigerant: R407C Compressor: Sanyo | Country: Jordan Application: Textile Factory Type: heat pipe heat recovery type Cooling capacity: 368kW Heating capacity: 359kW Refrigerant: R410A Compressor: Copeland With heat recovery coil | Country: USA Application: Residential Type: heat pump type Cooling capacity: 5 Ton Heating capacity: Refrigerant: R410A Compressor: COP: 3.0 Power supply: 230V/3PH/60Hz |
| | | |
| Country:UAE Application:offshore Drilling Platform Cooling capacity: 80kw Supply air volume: 4000×2 m3/h Condensing fan: 12000m3/h Refrigerant: R407C Power supply:430V-3Ph-60Hz Evaporator & condenser type: copper tube epoxy aluminum fin | Country:Australia Application:hall Cooling capacity: 128kw Heating capacity: 135kw Capacity regulator: 0,25,50,75,100 Power supply: 415V/3PH/50hz Refrigerant:R410A | Country:China Application: Amusement park Cooling capacity: 180kw Heating capacity: 192.5kw Supply air volume: 32000m3/h ESP: 550pa Power supply: 380V/3PH/50hz Refrigerant:R22 | Country: Philippines Application: Factory Type: Fresh air type Cooling capacity:21.9kw Heating capacity:25kw Supply air volume: 3000m3/h Electric heating: 6kw Power supply:220v/3PH/60hz 10% fresh air Refrigerant:R410A |
| | | |
| Country: China Application: Rolling bearing manufacturer Type: wheel heat recovery type One model: Cooling capacity: 95kw Condensation and heating capacity: 55kw Supply air volume: 19000m3/h Exhaust air volume: 19000m3/h Another model: Cooling capacity: 210kw Heating capacity: 215kw Supply air volume: 38000m3/h Exhaust air volume: 38000m3/h | Country: China Application:Flight simulation system laboratory Cooling capacity:10kw Supply air volume:3000m3/h Power supply: 380V/3PH/50Hz | Country: China Application:Ferry waiting hall Type: heat pump type Cooling capacity:182.5kw Supply air volume: 22000m3/h | Country: China Application: Cool Storehouse Type: constant temperature and constant humidity unit One model: Cooling capacity: 22kW Electric heating capacity: 82kW Humidifying capacity: 6kg/h Supply air: 4500 m3/h Another model: Cooling capacity: 180kW Electric heating capacity: 90kW Humidifying capacity: 30kg/h Supply air: 35000 m3/h |
| | | |
After-Sales Service:
1. If the project needs our installation guidance, we can send our engineer and translator, but not free. We can also send customers installation video to teach them how to fix and operate with our product.
2. Usually, our product warranty is 18 months after leaving factory or 12 months after installation. within this months, all parts broken will be responsible for our factory.