Shanghai Shenglin M&E Technology Co., Ltd.
Shanghai Shenglin M&E Technology Co., Ltd.
Add to Cart
Screw Type Water Source Heat Pump Unit
Features:
Renewable. The water/ground source heat pump is an air conditioning system that uses the solar resources stored by the earth as a source of cold and heat. The soil and water on the surface naturally maintain a relative balance of energy acceptance and divergence. The successful use of ground source heat pump technology makes it a reality to use the almost unlimited ground energy stored in it.
Energy efficient. The groundwater temperature used by the water/ground source heat pump is 10-16℃ in winter, which is higher than the ambient temperature, and 18-30℃ in summer, which is lower than the ambient temperature. The efficiency of the unit is greatly improved, and it can save energy by 30-40% Expenses, inputting 1KW of electric energy can get more than 4KW of heat or more than 5KW of cold.
High environmental and economic benefits.When the water/ground source heat pump unit is running, it does not consume or pollute water, and it does not need to burn fuel, which has significant environmental benefits. Compared with air source heat pumps, it can save energy by more than 40%, and compared with electric heating, it can reduce energy by more than 70%.
Wide operating range.The water/ground source unit has a wide operating range and is suitable for air conditioning and heating. It also has outstanding performance in industrial cooling, heating, and waste heat recovery. The heat source inlet temperature of the unit is 8~35℃, and it can provide 7℃ chilled water and 45~60℃ or higher temperature hot water
Technical paramater:
| Unit model (GSHP) | GSHP 140B | GSHP 150B | GSHP 190B | GSHP 200B | GSHP 230B | GSHP 270B | GSHP 300B | ||
| Cooling capacity | kW | 135 | 145 | 189 | 195 | 231 | 266 | 296 | |
| Heating capacity | kW | 149 | 163 | 211 | 217 | 254 | 294 | 324 | |
| Power supply | - | 380V3Ph50Hz | |||||||
| Energy regulation | % | 0,25,50,75,100 | |||||||
| Compressor | Type | Semi-hermetic screw compressor | |||||||
| Cooling input power | kW | 21.4 | 24.2 | 31 | 31.8 | 36.4 | 41.8 | 45.2 | |
| Cooling operating current | A | 45.1 | 48.5 | 60.2 | 61.4 | 69.2 | 79.3 | 83.9 | |
| Heating input power | kW | 29.1 | 33 | 42.2 | 43.4 | 49.6 | 57 | 61.6 | |
| Heating operating current | A | 54.9 | 60.1 | 76.1 | 77.8 | 88.2 | 101.3 | 108.1 | |
| Maximum operating current | A | 69 | 75 | 95 | 97 | 110 | 127 | 135 | |
| Refrigeration | Working fluid | - | R22 | R22 | R22 | R22 | R22 | R22 | R22 |
| Adding amount | kg | 26 | 28 | 36 | 38 | 44 | 51 | 57 | |
| Evaporator | Type | - | Shell and tube heat exchanger | ||||||
| Water side resistance | kPa | 43 | 43 | 43 | 43 | 45 | 45 | 45 | |
| Pipe specifications | DN | 65 | 65 | 80 | 80 | 80 | 80 | 80 | |
| Cooling conditions use side water flow | m3 /h | 23.2 | 25 | 32.6 | 33.5 | 39.7 | 45.8 | 50.9 | |
| Heating conditions heat side water flow | m3 /h | 12.9 | 14 | 18.1 | 18.6 | 21.9 | 25.4 | 28.2 | |
| Condenser | Type | - | Shell and tube heat exchanger | ||||||
| Water side resistance | kPa | 45 | 45 | 45 | 45 | 47 | 47 | 47 | |
| Water flow | DN | 65 | 65 | 80 | 80 | 80 | 80 | 80 | |
| Cooling conditions use side water flow | m3 /h | 12.2 | 13.2 | 17.2 | 17.7 | 20.9 | 24.1 | 26.7 | |
| Heating conditions heat side water flow | m3 /h | 25.7 | 28.1 | 36.2 | 37.3 | 43.6 | 50.5 | 55.8 | |
| Overall | Length A | mm | 2960 | 2960 | 2960 | 2960 | 2960 | 2960 | 2960 |
| Width B | mm | 710 | 710 | 710 | 710 | 710 | 850 | 850 | |
| Height C | mm | 1430 | 1430 | 1530 | 1530 | 1550 | 1550 | 1550 | |
| Unit net weight | Kg | 1530 | 1680 | 1860 | 2060 | 2150 | 2380 | 2520 | |
Note:
1) The cooling capacity of the unit and the power consumption calibration conditions of the compressor: evaporator inlet and outlet water temp (12/7°C), condenser inlet and outlet water temp(18/29°C)
2) Calibration conditions for heat generation and compressor power consumption: evaporator inlet and outlet water temp (15/8°C), condenser inlet and outlet water temp (40/45°C)
3) The standard pressure-bearing capacity of the condenser and evaporator water circuit is 1.0MPa, and the fouling factor: 0.086 ㎡°C/kW
4) If the specifications listed in this table change, please excuse for no notice
Some overseas project:
